﻿_______________________________________________________________________________
         Gowin Customized PHY 参考设计阅读指南
----------------------------------------------------------------------
目标器件：GW5AST-LV138FPG676AES
----------------------------------------------------------------------
文件列表
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt					  --> 自述文件
| -- project
|    |	`-- fpga_project.gprj		  --> 参考设计工程
|    |-- src
|      |  `-- top.v		              --> 工程顶层模块
|      |  `-- fpga_project.cst        --> cst文件
|      |  `-- fpga_project.rao        --> rao文件
|      |  `-- fpga_project.sdc        --> sdc文件
|      |  `-- serdes                  --> serdes ip文件夹
|      |  `-- prbs7_chk.v             --> prbs7 checker
|      |  `-- prbs7_gen.v             --> prbs7 generator
|      |  `-- prbs7_single_channel.v  --> prbs7 tester
|    |-- impl
----------------------------------------------------------------------
使用说明：
	1、板测：使用云源软件打开上述文件中fpga_project.gprj，设置工程顶层模块，综合；根据所使用器件设置约束和fpga_project.rao后布局布线后下载测试。使用GAO抓取数据。


_______________________________________________________________________________
        Example Customized PHY Design Readme
----------------------------------------------------------------------
Object device:GW5AST-LV138FPG676AES
----------------------------------------------------------------------
File List:
----------------------------------------------------------------------
.
| -- docs
|    `-- readme.txt					  --> Read Me file (this file)
| -- project
|    |	`-- fpga_project.gprj		  --> GowinYunYuan Project File for Example Design
|    |-- src
|      |  `-- top.v		              --> Top file for GowinYunYuan Project
|      |  `-- fpga_project.cst        --> cst file
|      |  `-- fpga_project.rao        --> rao file
|      |  `-- fpga_project.sdc        --> sdc文件
|      |  `-- serdes                  --> serdes ip folder
|      |  `-- prbs7_chk.v             --> prbs7 checker
|      |  `-- prbs7_gen.v             --> prbs7 generator
|      |  `-- prbs7_single_channel.v  --> prbs7 tester
|    |-- impl


----------------------------------------------------------------------
Instructions:
	1、Onboard test:Launch GOWIN FPGA Designer	and select "File -> Open -> Project", set Top Module and Include Path. After Sythesize, cofigure Physical Constraints and GAO Config Files.

