In order to optimize your browsing experience we uses cookies. You agree to the usage of cookies when you browsing this site.
For more information regarding cookies and the processing of your personal data please read our Privacy Policy.
SUPPORT
Listen to Your Voices and Let Us Know Your Needs
Back
Gowin MIPI DSI/CSI-2 Transmitter
Introduction
Gowin MIPI DSI/CSI-2 Transmitter IP receives byte-aligned pixelstreams and synchronization control signals, and composes pixel data frames and synchronization control frames in accordance with the DSI/CSI-2 protocol and user-configured parameters, and then drives the Gowin MIPI D-PHY TX Advance IP interface to realize MIPI DSI/CSI-2 DPHY
transmission.
The current version simplifies the transmission logic. In DSI mode, it temporarily supports only single-packet mode. Similar to CSI-2 mode, it sends only one short packet or one long packet in a single transmission, which reduces resource utilization.
Features
- Complies with MIPI DSI V1.1 and MIPI CSI-2 V1.1 standards
- Supports MIPI D-PHY TX input with 1, 2, 3, or 4 data lanes
- Supports MIPI D-PHY TX mode with 8:1 and 1:16
- Supports various data types (DT) with different virtual channel (VC) identifiers
- Supports ECC generation for packet headers
- Supports CRC generation for the data byte stream (optional)
- Supports continuous clock mode (non-continuous clock mode is currently not supported)
- Supports Low Power (LP) mode during vertical and horizontal blank interval
- Supports the insertion of End of Transmission Packet (EoTP) short packets as defined in the MIPI DSI standard
- Supports three video modes as defined in the MIPI DSI standard
- Non-burst mode with sync pulses
- Non-burst mode with sync events
- Burst mode